FVMQ O-rings

Find the right O-ring

search
search
mm
Value for the inside diameter in mm. (e.g. 10 or 25.5)
mm
Enter a value for the cross section in mm.
Material
i
Hardness
i
Group By

Fluorosilicone was invented by Dow Corning in the early 1950’s. The international nomenclature for fluorosilicone rubber is FVMQ. FVMQ polymers are built of polysiloxane chains where methyl side groups are replaced by trifluoropropyl side groups. Therefore they have nearly the same mechanical and physical properties as silicone rubber but due to the fluorination they show better resistance against many fluids. FVMQ polymers typically contain 23-28 % Fluor. FVMQ has a good heat resistance, very good low temperature flexibility and excellent resistance to weather, ozone and UV rays. Compared to VMQ the temperature range is slightly reduced from -50°C to +180°C.
 

FVMQ rubber compoud is resistant against

• Automotive fuels (gasoline leaded/unleaded, diesel, RME and various test fuels)
• Mineral and synthetic oils
• ATF (automatic transmission fluid)
• Jet fuels and oils
• Various other chemicals and many solvents

Fluorosilicone was invented by Dow Corning in the early 1950’s. The international nomenclature for fluorosilicone rubber is FVMQ. FVMQ polymers are built of polysiloxane chains where methyl side groups are replaced by trifluoropropyl side groups. Therefore they have nearly the same mechanical and physical properties as silicone rubber but due to the fluorination they show better resistance against many fluids. FVMQ polymers typically contain 23-28 % Fluor. FVMQ has a good heat resistance, very good low temperature flexibility and excellent resistance to weather, ozone and UV rays. Compared to VMQ the temperature range is slightly reduced from -50°C to +180°C.
 

FVMQ rubber compoud is resistant against

• Automotive fuels (gasoline leaded/unleaded, diesel, RME and various test fuels)
• Mineral and synthetic oils
• ATF (automatic transmission fluid)
• Jet fuels and oils
• Various other chemicals and many solvents