| Product | Dimensions | Material | Hardness (Shore A) | Certification | Stock | ||
|---|---|---|---|---|---|---|---|
| O-ring Black | 28 mm x 1.3 mm | FFKM - FFPM | 75 Shore A | Nee |   | |
| O-ring Black | 391 mm x 3 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 124 mm x 5.7 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 58.75 mm x 6.6 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 2.2 mm x 1.1 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 49.7 mm x 5.7 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 4.5 mm x 1.2 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 213.9 mm x 3.1 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 99 mm x 5.5 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 5.1 mm x 1.5 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 23.60 mm x 1 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 355.3 mm x 3.53 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 111.6 mm x 3 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 51.7 mm x 2.3 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 20.16 mm x 2.45 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 352 mm x 9 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 20.5 mm x 2.2 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 353 mm x 7 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 59 mm x 4 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 7.9 mm x 1.25 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 253 mm x 8 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 115 mm x 9 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 6 mm x 5.5 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 5.84 mm x 1.27 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 24.100 mm x 3.53 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 367.68 mm x 6.99 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 114.6 mm x 6 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 54.62 mm x 3.3 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 13.16 mm x 1.78 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 253.98 mm x 6.99 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 69 mm x 2.4 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 31.7 mm x 1.2 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 11 mm x 8 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 144 mm x 2 mm | FFKM - FFPM | 75 Shore A | Nee | | |
|
| O-ring Black | 31.8 mm x 2.65 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 638 mm x 4 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 270 mm x 12 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 13.7 mm x 2 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 259 mm x 7 mm | FFKM - FFPM | 75 Shore A | Nee | | |
| O-ring Black | 70.36 mm x 2.45 mm | FFKM - FFPM | 75 Shore A | Nee | | |
To provide even greater thermal stability and solvent resistance, tetrafluoroethylene (TFE) containing fluoroelastomer terpolymers were introduced in 1959. The latest FKM polymers have a much broader fluids resistance profile than standard fluoroelastomers, and are able to withstand strong bases and ketones as well as aromatic hydrocarbons, oils, acids, and steam. In 1975 a new fluoroelastomer family was introduced by Asahi Glass Co., FEPM, based on an alternating copolymer of TFE and propylene. It is marketed under the trade name AFLAS®.
The chemical resistance and high-temperature stability is due to the bulkiness of the fluorine atoms, shielding the polymer backbone and carbon-fluor bond from attack, and the high bonding energy of the carbon-fluor bond.
FFKM gives the indication for the types of improved properties for different applications.
Material: Fluorocarbon elastomers
Fluorocarbon rubber is an elastomer
Fluorocarbon elastomers are highly fluorinated carbon-based polymers that are used in applications that must withstand aggressive chemical and ozone attacks.
In general, with increasing fluorine content, the resistance to chemical attack is improved, while the low temperature properties decrease. However, there are special quality fluorocarbons that do have a high fluorine content at low temperature properties.
Good qualities:
FFKM
FFKM are perfluoroelastomeric compounds that contain an even greater amount of fluorine than FKMO fluoroelastomers.
FFKM have an improved resistance to high temperatures and chemicals and are even resistant to environments where oxygen plasma is present for many hours. Certain grades have a maximum continuous service temperature of 327 °C / 621 °F. They are often used to make o-rings and gaskets that are used to make o-rings and gaskets that are used in applications where contact with hydrocarbons or highly corrosive liquids the case, or when a wide temperature range is encountered.
On this page we offer our range of N775 certified O-Rings. Search for your specific O ring by using the filters on the left of the page or take your time and browse our wide range of our products. When you can not find the product you are looking for in our N775 certified made from FFKM, please send us a Direct Enquiry. Together we can discuss the specifications and find the right product for you.
To provide even greater thermal stability and solvent resistance, tetrafluoroethylene (TFE) containing fluoroelastomer terpolymers were introduced in 1959. The latest FKM polymers have a much broader fluids resistance profile than standard fluoroelastomers, and are able to withstand strong bases and ketones as well as aromatic hydrocarbons, oils, acids, and steam. In 1975 a new fluoroelastomer family was introduced by Asahi Glass Co., FEPM, based on an alternating copolymer of TFE and propylene. It is marketed under the trade name AFLAS®.
The chemical resistance and high-temperature stability is due to the bulkiness of the fluorine atoms, shielding the polymer backbone and carbon-fluor bond from attack, and the high bonding energy of the carbon-fluor bond.
FFKM gives the indication for the types of improved properties for different applications.
Material: Fluorocarbon elastomers
Fluorocarbon rubber is an elastomer
Fluorocarbon elastomers are highly fluorinated carbon-based polymers that are used in applications that must withstand aggressive chemical and ozone attacks.
In general, with increasing fluorine content, the resistance to chemical attack is improved, while the low temperature properties decrease. However, there are special quality fluorocarbons that do have a high fluorine content at low temperature properties.
Good qualities:
FFKM
FFKM are perfluoroelastomeric compounds that contain an even greater amount of fluorine than FKMO fluoroelastomers.
FFKM have an improved resistance to high temperatures and chemicals and are even resistant to environments where oxygen plasma is present for many hours. Certain grades have a maximum continuous service temperature of 327 °C / 621 °F. They are often used to make o-rings and gaskets that are used to make o-rings and gaskets that are used in applications where contact with hydrocarbons or highly corrosive liquids the case, or when a wide temperature range is encountered.
On this page we offer our range of N775 certified O-Rings. Search for your specific O ring by using the filters on the left of the page or take your time and browse our wide range of our products. When you can not find the product you are looking for in our N775 certified made from FFKM, please send us a Direct Enquiry. Together we can discuss the specifications and find the right product for you.
